Introduction
Motorola TETRA radios are available with various firmware versions, each featuring one of the following standard AIE TETRA Encryption Algorithms (TEAs):
– CLEAR NonE2 (No Encryption) This is the only one for HamRadio use!
– TEA1 is for commercial use and is primarily used by critical infrastructure around the world. But it’s also used by some police and military agencies outside of Europe.
– TEA2 (restricted to use by Schengen / EU countries). Possession of TEA2 radios is in many countries
prohibited by law!
– TEA3 Essentially the export version of TEA2 which is for use outside of Europe by the same kinds of entities that use radios with TEA2.
– TEA4 For commercial use but is hardly used.
In 2022 ETSI introduced additional algorithms, TEA 5, TEA 6 and TEA7, in order to future-proof the technology against quantum attacks. The entire set of these original and additional algorithms will be made available in the public domain as well as TAA1 (the original authentication and key management specification) and TAA2 (the new authentication and key management specification).
Each TEA version builds upon the previous one, incorporating enhancements to meet evolving user needs and address emerging challenges in communication security and efficiency.
Frequency Range from Factory:
The Motorola MXP600 series includes several models, also serveral HW revisions, each designed to operate within specific frequency ranges. Here are some common models and their corresponding frequency ranges:
Model Number – MDH77PCN6TZ5AN PTW952HEB MXP600 Frequency Range350-470 MHZ
Model Number – MDH77PCN6TZ5ANB PTW952HEB ROM CLR QA07836AA MXP600 Frequency Range350-470 MHZ BULK
Model Number – MDH77PCN6TZ5ANSP01 PTW952HEB MXP600 BSI Frequency Range350-470 MHZ
Model Number – MDH77PCN6TZ5ANSP02 PTW952HEB MXP600 SECTRA Frequency Range350-470MHZ
Model Number – AZH77PCN6TZ5AN PTW952HEB MXP600 Frequency Range350-470 MHZ
Model Number – ANH77PCN6TZ5AN TW952HEB MXP600 Frequency Range350-470 MHZ
Model Number – MDH77PCN6TZ5ANSP07 PTW952HEB MXP600 GREEN Frequency Range350-470MHZ
Expanded Frequency Range:
Ham band covered, no need expanding
Adaptation for Ham Radio Use
While initially tailored for professional applications, its versatility for ham radio use has gained widespread recognition and adoption within the HamTetra community. Regarded as a state-of-the-art TETRA radio, the MXP600 is highly coveted.
Refurbished units are also prevalent in the market. It’s recommended to purchase from known, reputable sellers to avoid potential issues!
With straightforward programming to accommodate amateur radio bands, enthusiasts can integrate the MXP600 into their setups easily.
Attention! Due to the nature of the radio market, some units may originate from governmental working environments, still in use, stolen, lost, or intended for destruction but salvaged by individuals. If you notice any signs such as radio logos, initial messages, back labels, or additional markings indicating that the radio might be a “tea 2” or not a “clean radio,” do not purchase it. Instead, return the radio to the seller or report it to the nearest police station.
Only Clear radio firmware can be used for HamTetra use!!
Programming
To program the Motorola MXP600, you will need a compatible programming cable and Motorola Tetra CPS or Motorola Tetra CPS Depot software. Additionally, for firmware upgrades, depend of existing radio firmware you need the right RPK. Motorola MXP600 firmware can be upgraded through Motorola Tetra CPS or Motorola Tetra CPS Depot software.
Please be aware that beginning with firmware version 2022.4, the traditional downgrade option is no longer supported. However, some users have reported successful downgrades using specific flash cables and upstart kernels. It’s important to note that this procedure should only be attempted by advanced users with extensive knowledge. We do not assume responsibility for any damages that may occur as a result of the downgrade process!
Please refer to the Radio Quick Start Guide
Programming Cable
Programming the Motorola MXP600 is a straightforward process thanks to the availability of dedicated programming cable.This cable facilitate seamless communication between the radio and programming software, allowing users to customize settings, configure channels, and update firmware with ease.
Programming Cable for use:
Motorola PMKN4230 ION & MXP600 GCAI-mini Programming Cable
Motorola PMKN4127 MXP600 & MTP6650 Serial Programming Cable
Motorola PMKN4129 – programming USB cable for Motorola MXP600 MTP3100 MTP3250 MTP3500 MTP3550 MTP6550 MTP6750 Tetra radios
Antenna Considerations
Motorola MXP600 uses combination GPS/Radio Antenna so when replacing the antenna, it’s important to take into account this factor.
Pinout
Accessories
N/A
Operating Procedures
Please refer to the user manual Here
Interfacing with Ham Radio Networks
The Motorola MXP600 smoothly integrates into HamTetra environments, demonstrating reliability in Direct Mode Operation (DMO), Trunked Mode Operation (TMO) and DMO Repeater Mode, ( It works as a DMO repeater also ).
Compatibility with Other Radio Manufacturers
The Motorola MXP600 is designed to interface with radios from other manufacturers, ensuring interoperability and compatibility across diverse communication systems.
Maintenance and Troubleshooting
Regular maintenance, including battery checks, firmware updates, and cleaning, ensures optimal performance and longevity of the MXP600 In the event of issues or malfunctions, troubleshooting procedures provided by Motorola or the HamRadio community can assist in diagnosing and resolving problems effectively.
The pinout diagram and each MXP600 model number @YO8TEH
* We do not provide programming software, licenses, additional information, or technical support beyond what is available through above published information!